Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
  • Hartke HA1200 Kickback 12" Aluminum Cone Speaker 120-Watt Bass Guitar Combo
In cart Not available Out of stock
£299.00

-UK Shipping Only- Hartke Kickback HA1200 Bass Amp - Custom Hartke Speaker Enter the year 1999 Hartke’s Kickback series of portable and affordable bass combos. Built to be roadworthy, the Kickback HS 1200 packs a 120-watt amp and a 12-inch aluminum-core speaker into a 43-pound cabinet, along with all the fixin’s: three-band tone control, passive/active input jack, headphone jack, XLR and 1/4 –inch outputs. And a Shape control that allows sweepable equalization.

Like all Hartkes, the Kickback has a full-bodies tone that is punchy and very present. While many bass amps offer a rather limited eq range, the Kickback’s tone controls have a broad sweep, giving you plenty of room in which to carve out your own sound. The tilt-back cabinet design allows for a directional clarity, a feature that is particularly useful on tight stages and in small rehearsal rooms.

The Kickback’s Shape circuit provides a moderate boost in certain frequency areas and deep attenuation in others. Once the circuit is activated, the Shape knob can be swept to impose the circuit’s filter on specific frequencies within a range of 80Hz to 1kHz. While the circuit can be used to create a myriad of sounds, from thin and pinched to wide and deep.

Fully serviced, ready to Rumble!

In Brief:

Revolutionary "Two-Way" (Upright & Tilt-Back) Cabinet Design For Performance/live Monitoring Custom Hartke 12" Aluminum-Cone Driver that stops speaker flapping 120 Watts/Baggs of head room! Small Combo, Big Sound and will easily fit on the front car seat Unique "Shape" Control For Accurate Tone-Shaping 3-Band EQ Passive/Active Input Jack Balanced XLR Out Rear Tuned Bass Port - Save on shipping - pick-up in store.

Read more… close
Ashdown MAGC210T Bass Combo 300 Watts, 2x10
  • Ashdown MAGC210T Bass Combo 300 Watts, 2x10
  • Ashdown MAGC210T Bass Combo 300 Watts, 2x10
  • Ashdown MAGC210T Bass Combo 300 Watts, 2x10
  • Ashdown MAGC210T Bass Combo 300 Watts, 2x10
In cart Not available Out of stock
£299.00

Ashdown MAG C210T Combo The MAG C210T-300 2 x 10 in. + tweeter combo features a potent new fan-cooled 307 watts RMS power section. Rotary bass, middle and treble controls are supplemented by smaller rotary controls providing 15dB of cut and boost at 220Hz and 1.6kHz, providing a comprehensive 5 band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to attacking and warm, rounded sounds respectively and, on the subject of low-end response, the trademark Ashdown sub-harmonic generator is ready and able to deliver truck loads of earth moving tone if called upon. Inputs are provided for active and passive instruments and the front panel also features an effects send and return, a tuner/line output and a balanced DI output for direct connection to a mixing console.

All MAG combos have extension speaker outputs and are loaded with Ashdown BlueLine speakers for exceptional attack, clarity and low-end performance. Protection is provided by tough black carpet covering and new steel grilles, while the amplifier chassis is constructed from light yet strong, heat-dissipating magnesium alloy for 'roadie-free' portability. And, of course, the famous Ashdown VU meter remains central to the cool look of these great, value for money bass amplifiers. No Post Pick-up in store item only.

Read more… close
Pre-owned Ashdown Mag 500 4x10 Bass Combo
  • Pre-owned Ashdown Mag 500 4x10 Bass Combo
In cart Not available Out of stock
£429.00

This Ashdown Mag 500 combo with a set of 4x10" Ashdown BlueLine drivers with an HF horn in a precision tuned cabinet. The cabinet is constructed from high-grade birch ply with properly screwed and glued joints, protected by a tough, buffalo leather cloth covering and chromed metal corners. All amplifier chassis are built from heavy-duty 16 swg zinc coated mild steel, foil lined to minimise interference, and special Ashdown-designed metal handles are used in favour of inferior flip handles which can rattle after years of use.

Its a 575 watts RMS bass amp head designed to satisfy both bass-purists and tech-heads alike. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones. Because of the weight posting is out of the question so this item is a pick-up only. Thank you.

Read more… close
Pre-owned Ashdown MAG 300 4x10 bass combo amp
  • Pre-owned Ashdown MAG 300 4x10 bass combo amp
In cart Not available Out of stock
£349.00

Great-sounding bass combo amp that has been used mainly for practice as well as a few gigs.
4 x 10" Blueline speakers and tweeter
Fan-cooled 300 watts RMS power section
Rotary bass, middle and treble controls are supplemented by smaller rotary controls 15dB of cut and boost at 220Hz and 1.6kHz Front panel push switches for Bright and Deep settings
Ashdown sub-harmonic generator
Inputs for active and passive instruments
Effects send and return
Tuner/line output
Balanced DI output
No post, pick up in store item only.

Read more… close
Pre-owned Ampeg SVT 3 Pro Bass Amp Head
  • Pre-owned Ampeg SVT 3 Pro Bass Amp Head
  • Pre-owned Ampeg SVT 3 Pro Bass Amp Head
In cart Not available Out of stock
£789.00

It's all about tone. The SVT-3PRO's Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices" for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if that's not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel" for your show-stopping bass solo.

The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.

Features/Specifications:

Tube Drive Control
1/4" and Neutrik Speakon Outputs
Input Peak LED
Input Pad and Bright Switch
Mute Switch and Tuner Out
Further Specs:

RMS Power Output (8 Ohms): 275-Watts
RMS Power Output (4 Ohms): 450-Watts
Preamp: Tubes (3 x 12AX7)
Driver Tubes: 1 x 12AX7, 1 x 12AU7
Power Amp: Solid-State
Tone Controls: 3-Band
Mid Tone Control: 5-Position
Graphic EQ: Yes, 9-Band
Ultra Low/High Boosts: Yes
Balanced Line Out: Yes, Pre/Post with Ground Lift and Level
Effects Loop: Yes
Preamp Out/Power Amp In: Yes
Dimensions & Weight:

Width: 19"
Height: 3.5"
Depth: 15.5"
Weight: 26 Pounds
Fully serviced ready to plug-in and enjoy!
No Delivery - pick-up in store only.

Read more… close
Ampeg SVT-410HE Classic Series 4x10" Bass Speaker Cabinet Black
  • Ampeg SVT-410HE Classic Series 4x10" Bass Speaker Cabinet Black
  • Ampeg SVT-410HE Classic Series 4x10" Bass Speaker Cabinet Black
  • Ampeg SVT-410HE Classic Series 4x10" Bass Speaker Cabinet Black
  • Ampeg SVT-410HE Classic Series 4x10" Bass Speaker Cabinet Black
  • Ampeg SVT-410HE Classic Series 4x10" Bass Speaker Cabinet Black
In cart Not available Out of stock
£429.00

This super powerfull Ampeg SVT 410 HE Bass Cab is in exellent condition. Comes with a strong padded gigbag in good road worn condition. The Ampeg SVT-410HE delivers superb full-range performance, all the way up to 18kHz.

The Ampeg SVT-410HE is the ideal enclosure for the player who wants to add extended upper register clarity to a system that already features ample low frequency performance. Just ask George Clinton—he uses an SVT-410E to round out the top-end of his killer, all-SVT stage setup.

Ampeg SVT-410HE main features include:

1/4 and Neutrik Speakon Jacks Variable HF “L-Pad” Baltic Birch Plywood LF Drivers: 4 x 10” Voice Coil: 2” Magnet Weight (each): 30 oz HF Drivers: Horn/Driver Voice Coil: 1” Magnet Weight (each): 8 oz RMS Power Handling: 500-Watts Frequency Response (-3dB): 60Hz-18kHz Usable Low Frequency (-10dB): 43Hz Nominal Impedance: 8-Ohms Sensitivity: 98dB Maximum SPL: 122dB Dimensions (W x H x D inches): 24 x 25 x 16 Weight: 91 Pounds No post- Local pick-up only.

Read more… close
Modified Trace Elliot 1980s 1x15 Speaker Cab
  • Modified Trace Elliot 1980s 1x15 Speaker Cab
  • Modified Trace Elliot 1980s 1x15 Speaker Cab
  • Modified Trace Elliot 1980s 1x15 Speaker Cab
  • Modified Trace Elliot 1980s 1x15 Speaker Cab
In cart Not available Out of stock
£149.00

Here we have a Modofied 1980s 1x15 Trace Elliot Speaker cab. Did have the GP7 amp fitted but recently packed up so I removed the amp(kept for spares) fitted a lead and jack to the cab(not shown in photo) and ready to plug into your bass head. This beast has no tolex/carpet/vinyl covering, this bad boy is bare laminate marine play painted black (the idea being you could ding it on tour and then touch it up after - nice!) To heavy for posting so pick up in-store only please.
Pick-up in store only.

Read more… close
Pre-owned Ampeg B-410H Bass Speaker Cab
  • Pre-owned Ampeg B-410H Bass Speaker Cab
In cart Not available Out of stock
Not available

With its four specially designed 10" speakers, 1" horn. The Ampeg B-410H was born to rock hard and low. Suitable for most sizes of venues, heavy-duty recessed handles and detachable casters. The extended range of the B-410H makes it ideal for 5- or 6-string bass players seeking solid low frequency performance (all the way down to 40Hz), with shimmering top-end up to 18kHz.
he rear jackplate features two 1/4" jacks wired in parallel, allowing for easy daisy-chaining from one speaker to another. Either jack can be used as an input or a through connection. The sweeping position HF Horn switch allows for full high frequency output.

Full-Range, Two-Way Enclosure<br> Baltic Birch Plywood<br>

NO DELIVERY - IN STORE PICK-UP ITEM ONLY.

Read more… close